Motorcycle Products

                                                                                                                                        RoHS Compiance - Environmental Laws restrict the use of certain hazardous substances. “RoHS: Compliant” addresses the laws transposed from the European Union directive 2002/95/EC known as the RoHS Directive.

When you ride your Motorcycle do you ever wonder if the person behind you is paying attention to what you are doing?

Q.     Would you like motorist's to be more aware of motorcycles? If the answer is yes then read on.

Q.    When somebody comes up behind you whilst, your riding if they saw flashing brake lights 

 would it make a difference?.

A.    Yes - Trials have proved that flashing brake lights make a difference

Maybe they are ,eating a sandwich, having a drink or even putting on make up.

Flash Sequence Standard Version Flash Sequence Intelligent Version

As you can see the problem with motorcycle brake lights are because they are low to the ground in comparison to the third brake light on cars and trucks, so it is important to ensure people SEE YOU.

Both the  "Standard" and "Intelligent" versions of the fully weatherized Blinking Smart Stop lets you maximize your Third Brake Light Effectiveness.  

Blinking Smart Stop "Standard" and "Intelligent" PLUS Brake Light Modules are Designed to work with 2 brake  lights or Storage cases
 

These compact State-of-the-Art solid-state electronic modules converts your ordinary center brake light into an attention getting visual aid alerting device when you are braking. 

Be Seen - Be Safe Be Blinking Smart

These sequences have been selected because of their ability to gain and retain a following driver's attention.
Smart Stop Standard Visual Aid Module: This compact State-of-the-Art solid-state electronic module converts your ordinary brake light into an attention getting visual aid alerting device when you are braking. With the Smart Stop installed, when you apply your brakes, it causes your brake light to automatically emit a visual alerting signal by flashing the light approximately 6 times before entering the steady-state on red light condition

Product rated at 6Amps

Plus version Rated at 30 Amps and is designed to work with multiple  brake  lights

 

Size: 26mm x 51mm x 13mm

Smart Stop Intelligent Visual Aid Module: Again This compact State-of-the-Art solid-state microprocessor controlled electronic module converts your ordinary brake light into an attention getting visual aid alerting device when you are braking. With the Smart Stop installed, when you apply your brakes, it causes your brake light to automatically emit a visual alerting signal by flashing the light 6 times before entering a steady brake light on for 3 seconds and flash 3 times then a flashing sequence of 3 flashes every 3 seconds with brake light on condition This sequence will continue all the time the brakes are applied  EVEN AT TRAFFIC LIGHTS.

Plus version Rated at 30 Amps and is designed to work with multiple  brake  lights

Size: 26mm x 51mm x 13mm

Simply follow the wiring instructions supplied with your Blinking Smart Stop or you can click to view the Installation instructions.

Emergency vehicles use flashing lights at all times because it gets attention from other road users. So why not use the Blinking Smart Stop  to grab the attention of following drivers, and reduce your risk of being hit in a rear-end collision?

 

Avoid Being A Victim

Key Benefits

  • A great aid from the elements, when a following driver's vision is impaired by fog, rain, snow, or darkness.

  • Saves money by preventing potential rear end collisions resulting in lower insurance claims, which leads to lower premiums.

  • These modules are designed to enhance an Motorcycles brake lights.

 

 Blinking Smart Stop  Motorcycle Version

Key Features

  • Standard & Intelligent  fully weatherized versions will work with any third brake lights including LED lights.

  • Smart Stop only works when the driver applies the brakes.

  • A very simple Do-It-Yourself Installation. Difficulty Rating 2 out of 10

Specifications

  • Operating Voltage:  12 Volts DC

  • Size:  1" x 2" x 0.5" (26mm x 51mm x 13mm) Smart Stop Standard  Version.

  • Wire Lengths:  12" (0.3m) Standard  and Intelligent Versions.

  • Operating Temp:  -30ºC to +70ºC.

  • Max Power Consumption:  1W.

What Your Order Includes

  • A 100% operationally tested Smart Stop Third Brake Light Module.

  • Splice Connectors.

  • Complete Installation Instructions.

  • Quick delivery within 5-7 days.

  • Emailed receipt and customer support.

  • 30 Day Risk Free, Money Back Guarantee. (less S & H).

Back to Top 

ORDER  TODAY - YOU WILL BE GLAD YOU DID

 Home | Facts | Automotive Products| Motorcycle Products l Installation l Automotive Order Form l Motorcycle Order Form l Testimonials l Contact

 

Copyright Kahtec Technologies 2006  - Terms and Conditions - Design By Webs From Us

For auto safety accessories, Lighting and other Laws vary from country to country.  Kahtec Technologies make no representation or warranty to the legality of its products for street use on any vehicle or in any location.